AMT-B
Front-fitted cropping machine with low cutting bar. It can be installed on any type of tractor and it uses the hydraulic equipment to operate.
The reinforced frame is fitted with a protective device with gas springs. The position of the low cutting bars can be hydraulically adjusted vertically (50 cm), horizontally (30 cm) and laterally (± 30°). The Schumacher cutting system (without blade tensioners) is also suitable for late processing work with woody material.
The reinforced frame is fitted with a protective device with gas springs. The position of the low cutting bars can be hydraulically adjusted vertically (50 cm), horizontally (30 cm) and laterally (± 30°). The Schumacher cutting system (without blade tensioners) is also suitable for late processing work with woody material.
- Mechanical auxiliary distributor with 5 levers, and pipes for connecting the tractor distributor with couplings
- Protective safety device with gas springs
- Storage lifting jack
Technical features
| MODEL | Low cutting bar |
| CUT | 165 cm |
| REQUIRED HYDRAUIC FLOW | 20-45 L/min |
| WEIGHT | 148 Kg |
| MODEL | Low cutting bar |
| CUT | 180 cm |
| REQUIRED HYDRAUIC FLOW | 20-45 L/min |
| WEIGHT | 153 Kg |
| MODEL | Low cutting bar |
| CUT | 195 cm |
| REQUIRED HYDRAUIC FLOW | 20-45 L/min |
| WEIGHT | 158 Kg |
| MODEL | Low cutting bar |
| CUT | 300 cm |
| REQUIRED HYDRAUIC FLOW | 20-45 L/min |
| WEIGHT | 180 Kg |
